LGH..CA(HA)
LGH..CA(HA)
  • LGH..CA(HA)
  • LGH..CA(HA)

 LGH..CA(HA)

Linear motion products  combine the knowledge and efforts of linear drive systems (ball and roller screws) and linear guides and tables. 

Linear drive systems typically use screws to transfer rotary into linear movements. This requirement is well achieved by our high efficiency driving products: miniature and large rolled ball screws, ground ball screws as well as different variations of roller screws. 

The second part of Linear Motion are linear guides and tables. The key know-how here is to find the most suitable guiding solution providing the needed accuracy, stiffness and positioning at the appropriate cost. 


>>
<<
SeleccionarInvestigaciónTypeSize of the components (mm) Size of the blocks (mm) Size of the slide shaft (mm) The fhrde bolt sizes of the slide shaftBasio dynamic fcced loadBasio stratic fcced loadPemaisaive static moment(kgf-m) Peso
HH1norteWsiB1CL1LsolM×ιTH2WRHRrehrePAGSmi(mm)C(kgf)Co(kgf)MOMXMYBlocks (kg)Slide shaft (kg/m)
AGW 20SA 28 6 19.5 59 49 5 - 26.2 48 12 M6 9 6 20 15.5 9.5 8.5 6 60 20 M5×16 650 920 10.1 4.5 4.5 0.34 2.16
AGW 20CA - - - - - - 32 44.1 65.9 - - - - - - - - - - - - 970 1450 15.9 10.4 10.4 0.36 -
AGW 25SA 33 7 25 73 60 6.5 - 34.5 58.7 12 M8 10 7 23 18.5 11 9 7 60 20 M6×20 1080 1330 16.7 7.8 7.8 0.44 2.95
AGW 25CA - - - - - - 35 58.3 82.5 - - - - - - - - - - - - 1550 2390 28.7 21.1 21.1 0.68 -
AGW 30SA 42 10 31 90 72 9 - 36.6 66.4 12 M10 10 8 28 24 11 9 7 80 20 M6×25 1550 2030 30.8 14 14 0.72 4.76
AGW 30CA - - - - - - 40 65.2 95 - - - - - - - - - - - - 2470 3390 51.3 35.5 35.5 1.16 -
>>
<<